Is the welding method of FPC the same as the Rigid PCB?

Is the welding method of FPC the same as the Rigid PCB?

Guide: Some novices may not have been in contact with the FPC before. It turned out to be PCB, and then there were doubts. There were questions on it. There were capacitance resistance chips. They were all picked. If you want to change to the FPC test now, do you want to ask the welding method the same as the PCB?

FPC

FPC is an deflection board. There are many devices on PCB that can only be used for rigid boards (PCB of hard materials, such as FR-4 or PTFE).

If you must use a scratch plate, then you must consider using the material combined with just scratching.

The specific method is that the components encapsulated by QFP and SOIC are made on the rigid board, and the blocking device is also on the rigid board. (Because the degree of freedom of the bending board is relatively high, the device cannot be welded directly on it. The device is hard, the FPC substrate is soft, and the pad will fall off.) When welding, you need to find a patch machine with a vacuum adsorption equipment or make a tooling fixture. Welding is lead or lead, and whether to make the PCB producer for PCB, whether the welding is clear, because when choosing the material, you need to consider temperature -resistant effects. Based on the first deflection board, it is necessary to understand whether the current supplier has the qualification to make FPCs, and at the same time, whether the FPC curved test equipment and execution standards are not fooled.

Finally, based on installation considerations, you still want to try new crafts. The overall strength and life of the deflection board are far less than the rigid board.